Contact Email List
FAQ  •  Register  •  Login

tb45 standalone ecu

Moderators: toaddog, V8Patrol

<<

Tb45gq

Posts: 4

Joined: Mon Jun 12, 2017 10:26 am

Post Tue Jun 20, 2017 1:08 pm

tb45 standalone ecu

can anyone help me out with the disributor header pinout on the tb45?
<<

Tb45gq

Posts: 4

Joined: Mon Jun 12, 2017 10:26 am

Post Tue Dec 12, 2017 9:26 pm

Re: tb45 standalone ecu

I found the information guys and thought i would post for anyone trying to install a standalone ecu. If you get no RPM signal then swap trig 1 and Trig 2 wires over.

1= Ign 1.
2= Coil/Ignitor high current ground (go to a solid ground, engine block etc).
3= Coil +12V
4= not connected.
5= Trigger 2.
6= Trigger 1.
7= +12V CAS power (I dont see why this cant come from same place as #3)
8= CAS Ground (Go to one of the "gnd out" pins on the Fury)

Return to Nissan

Who is online

Users browsing this forum: No registered users and 4 guests

cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group.
Designed by ST Software.
eBay Sniper
Time : 0.093s | 13 Queries | GZIP : Off | Load : 0.02