Contact Email List
FAQ  •  Register  •  Login

oil presure issues after install oil cooler

Moderators: toaddog, TWISTY, V8Patrol, Moderators

<<

djsiggie

Posts: 1

Joined: Wed Apr 13, 2016 2:34 pm

Post Wed Apr 13, 2016 2:51 pm

oil presure issues after install oil cooler

hi i have a 45 cruiser with 2h turbo motor a project i'v taken over was running fine with no oil cooler it just had a line going back on to its self at sandwich plate finally decided it was time to install oil cooler iv ran the lines mounted cooler but now i;m having oil pressure gauge not reading and engine shutting down within a minute of starting. iv checked oil level its fine got oil in cooler and lines i even just connected the two lines together and by past cooler if that would make a different's but didn't so i'm a bit lost on direction from here if anyone could help thanks
<<

bazzle

User avatar

Posts: 2499

Joined: Sun Nov 24, 2002 8:57 pm

Location: Melbourne

Post Wed May 11, 2016 12:00 pm

Re: oil presure issues after install oil cooler

undo one end of pipe and crank to ensure oil is going thru.

Return to General Tech

Who is online

Users browsing this forum: No registered users and 2 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group.
Designed by ST Software.
eBay Sniper
Time : 0.090s | 15 Queries | GZIP : Off | Load : 0.17